一种自适应入位固持装置及试验研究

为解决飞机数字化装配中难以对机身大部件增加辅助固持并保持大部件位姿不变的技术难题,提出一种基于气浮和万向球座的大部件位姿跟随固持方法,并设计制造称之为随动定位器的专用柔性工装.结合某工程,进行定位器关键参数的分析计算和相关工艺试验研究,并对油压波动、相关零件磨损对锁紧力的影响以及芯轴自由端关键参数选择与入位可靠性问题进行了研究.结果表明,在芯轴角度偏差较小时,随动定位器可以在确保大部件位姿不被破坏的情况下,实现芯轴的小阻力自适应入位,并可以根据选定的工作油压和配合间隙可靠固持大部件,其性能可以满足工程要求.     

巴彦浩特盆地演化特征与含油气性评价

古、中生代盆地发育受基底断裂控制,呈现由南向北迁移的特征。除自生自储类型以外,油气运移聚集主要与多期区域性不整合面有关。根据不同地区的改造特点、强度和保存条件等方面的差异,将盆地成藏单元类型划分叠合—再生型、改造—保存型、改造—再生型和改造—破坏型,其成藏条件和油气勘探远景依次变差。     

大口径纹影系统主反射镜装调结构分析与设计

研制纹影测试系统中大口径主球面反射镜的装调结构.利用有限元法,对有效通光口径直径为800 mm的主镜进行应力和面变形分析.采用断裂几率预测法校核玻璃机械强度,通过优化得出反射镜面变形的均方根(rootmean square,RMS),以此为依据,设计出满足系统技术要求的主镜装调结构.     

Modeling large reversible electric-field-induced strain in ferroelectric materials using 90° orientation switching

Reversible large electric-field-induced strain caused by reversible orientation switchings in BaTiO3 is modeled using the Landau's theory of phase transition. A triple well free energy function is constructed. Each of its minima is associated with one of the polarization orientations involved. Nonlinear constitu- tive laws accounting for reversible orientation switchings and electrostriction effects are obtained by using thermodynamic equilibrium conditions. Hysteretic dynamics of one-dimensional structures is described by coupled nonlinear differential equations. Double hysteretic loops in the electric and me- chanic fields are both successfully modeled. Giant reversible electrostriction is modeled as a conse-quence of reversible orientation switchings via electro-mechanical couplings. Comparisons with ex-perimental results reported in literatures are presented.     

燃煤发电机组锅炉节油技术

介绍浙能长兴发电有限公司300MW燃煤机组锅炉在节约燃油方面所采取的措施.     

Design of a broadband dielectric resonator antenna and its application in low sensitivity frequency beam‐scanning array with wide scanning angle and suppressed sidelobes

In this paper, a broadband dielectric resonator antenna (DRA) with a simple H‐slot feeding structure is proposed. The broad bandwidth (~45%) and uni‐directional radiation enable this DRA suitable to work as a radiation element in the construction of a beam‐scanning array with not only low frequency sensitivity which is important for accurate angle estimation of in‐coming targets, but also a wide scanning range. Moreover, stable coupling coefficients are established around all the above three resonances with respect to its corresponding feeding line, ensuring a low sidelobe level (SLL) across the whole operating frequency range. In order to realize such a DRA, a latticed rectangular structure is utilized to generate the lower two resonances, while the upper resonance is generated by its H‐shaped feeding slot. The shape of the latticed dielectric resonator is also modified according to a 3‐D printed fixing structure for an accurate installation. A 20‐element beam‐scanning prototype is demonstrated and manufactured. The range of scanning angle is from ?36° to +13° within the bandwidth of 10 to 16 GHz, corresponding to a frequency sensitivity of only 122.5 MHz/^o. The achieved SLL are smaller than 19 dB for all scanning beams. The above performance indicates that, this array is very suitable for near‐range radar systems requiring an accurate angle estimation.     

大内跨小边跨框架结构预应力筋优化布置方法

预应力筋的优化布置是大内跨小边跨的多跨预应力混凝土框架结构合理设计计算的关键.为满足控制截面承载力最大的需要,以往常将大跨所需预应力筋布置为连续曲线,并按水平直线延伸通过其相邻的两小跨,按这种布置方式仅使大跨内产生竖向向上的预应力等效荷载,可较好平衡大跨的竖向外荷载;而若将大跨及相邻的两小跨统一考虑,预应力筋按连续曲线布置,张拉产生的预应力等效荷载不但可有效平衡大跨的竖向外荷载而且也可平衡小跨的竖向外荷载,可以使荷载平衡得到优化实现.以一典型工程为例,分析了在相同条件下两种预应力筋布置过程中张拉引起的综合弯矩、主弯矩和次弯矩的分布和量值上差异,比较了两类布筋形式对正截面承载力计算结果的影响,验证了对大内跨小边跨框架结构统一考虑后整体上按三段连续正反抛物线预应力筋布置的合理性.     

电站锅炉烟气余热利用现状分析

介绍了电站锅炉烟气余热回收的现状,指出了余热回收、利用、发展3个阶段的特点,表明余热方案系统越来越复杂,节能效果越来越好,方案可选择性越来越多,需要优化.总结了余热方案优化常用的优化目标和优化方法.     

The Dynamical FSI Simulation for Bellows Inflating to Disperse Bomblets

According to the characteristics of fluid-structure interaction(FSI) in the process of metal bellows inflating to disperse bomblets,a 3D dynamical FSI model(W model) which describes the interaction between a viscous compressible flow and a structure undergoing large deformationis established.Then the dynamic characteristics of the metal bellows deformation, the changing law of the internal flow field and the motion law of the bombs are acquired.Where the internal pressure and bombs'' moving law are approximate to interior ballistic results, which indicates the W model established reasonably.Besides, considering gaps existing atthe bellows'' tow ends, the dynamical FSI modelcontaining gaps(Y model) is also built.The results of the W and Y models are compared and the results show that the existence of the gaps has little influence to the flow field and the stress distributionin the bellows,but obviously reduces the separation speed of the bomblets about 10%.     

大型桁架临时固结法吊装工法

超高、超重、超长桁架吊装施工的桁架稳定性,历来受到施工单位高度重视,能否在节省费用的同时做到施工安全及线性美观,是施工企业能否做到经济、迅速、高效的关键。京能水洞沟电厂输煤系统7号栈桥工程钢桁架架空结构吊装中,采用了新的施工工法,取得了良好的效果,为相似工程的施工积累了宝贵的经验,值得在类似结构的工程施工中借鉴。